Chart Advanced Features: Bubble

The following sections provide a list of available advanced attributes available for controlling and customizing Bubble chart elements.

Note

This article contains documentation for advanced attributes which are third-party customizations that must be manually entered into the chart wizard. These articles were converted directly from the documentation provided by this third-party source. Not every attribute listed may be supported in Exago BI as some unexpected conflicts may occur in their integration within the application.

Functional Attributes

These attributes let you control a variety of functional elements on the chart. For example, you can opt to show/hide data labels, data values. You can also set chart limits and extended properties.

Attribute	Type	Value	Description
animation	True/False	0/1	This attribute gives you the option to control animation in your charts. If you do not want to animate any part of the chart, set this as 0.
animationDuration	Number	In seconds	This attribute sets the animation duration of the chart. `animationDuration` attribute is applicable only if animation of the chart is enabled. Default value: 1 sec
palette	Number	1-5	Exago offers the concept of Color Palettes. Each chart has 5 pre-defined color palettes which you can choose from. Each palette renders the chart in a different color theme.
paletteColors	Text	List of hex color codes separated by comma	While the `palette` attribute allows to select a palette theme that applies to chart background, canvas, font and tool-tips, it does not change the colors of data items (i.e., column, line, pie etc.). Using `paletteColors` attribute, you can specify your custom list of hex colors for the data items. The list of colors have to be separated by comma e.g., `”paletteColors”: “#FF0000, #0372AB, #FF5904…”`. The chart will cycle through the list of specified colors and then render the data plot accordingly. To use the same set of colors throughout all your charts in a web application, you can store the list of palette colors in your application globally and then provide the same in each chart JSON.
negativeColor	Color	Hex Color Code	You can opt to color all bubbles with a negative Z value on the chart with a single color, which can be specified for this attribute.
showLabels	True/False	0/1	It sets the configuration whether the x-axis labels will be displayed or not.
maxLabelHeight	Number	In Pixels	This attribute can be used to set the maximum height for the x-axis labels (data labels) excluding the x-axis title. If any label goes beyond this height, the label will be truncated. In stagger mode, the number of stagger lines will be reduced if they exceed this value.
labelDisplay	Text	‘AUTO’, ‘WRAP’, ‘STAGGER’, ‘ROTATE’, ‘NONE’	Using this attribute, you can customize the alignment of data labels (x-axis labels). There are 5 options: AUTO, WRAP, STAGGER, ROTATE or NONE. By default, this attribute is set to AUTO mode which means that the alignment of the data labels is determined automatically depending on the size of the chart. WRAP wraps the label text if it is too long to fit in one line. ROTATE rotates the labels vertically. STAGGER divides the labels into multiple lines.
useEllipsesWhenOverflow	True/False	0/1	When enabled in auto mode, long data labels are truncated by adding ellipses to prevent them from overflowing the chart background. The default value is 1.
rotateLabels	True/False	0/1	This attribute lets you set whether the data labels will show up as rotated labels on the chart.
slantLabels	True/False	0/1	If you’ve opted to show rotated labels on chart, this attribute lets you set the configuration whether the labels will show as slanted labels or fully vertical ones.
labelStep	Number	1 or above	By default, all the labels are displayed on the chart. However, if you’ve a set of streaming data (like name of months or days of week), you can opt to show every n-th label for better clarity. This attribute just lets you do so. When a value greater than 1 (n) is set to this attribute, the first label from left and every label at the n-th position from left will be displayed. e.g., a chart showing data for 12 months and set with `labelStep: 3` will show labels for January, April, July, and October. The rest of the labels will be skipped.
staggerLines	Number	2 or above	If you’ve opted for STAGGER mode as `labelDisplay`, using this attribute you can control how many lines to stagger the label to. By default, all labels are displayed in a single line.
showValues	True/False	0/1	Sets the configuration whether data values will be displayed along with the data plot on chart.
showLimits	True/False	0/1	Whether to show chart limit values. If not specified `showYAxisValues` attribute overrides this value.
showVLimits	True/False	0/1	Whether to show chart limit values of the x-axis. If not specified `showXAxisValues` attribute overrides this value.
showDivLineValues	True/False	0/1	Whether to show div line values. If not specified `showYAxisValues` attribute over-rides this value.
showVDivLineValues	True/False	0/1	Whether to show vertical div line values. If not specified `showXAxisValues` attribute over-rides this value.
use3DLighting	True/False	0/1	Whether to use 3D Bubbles or 2D Bubbles.
bubbleScale	Number	0-2	If you want to proportionately increase/decrease size of all the bubbles on the chart, you can use this attribute. A value of less than 1 (but greater than 0) will decrease all the bubble sizes and vice versa.
adjustDiv	True/False	0/1	Exago automatically tries to adjust divisional lines and limit values based on the data provided. However, if you want to set your explicit lower and upper limit values and number of divisional lines, first set this attribute to false. That will disable automatic adjustment of divisional lines.
adjustVDiv	True/False	0/1	Exago automatically tries to adjust divisional lines and limit values of the x-axis based on the data provided. However, if you want to set your explicit lower and upper limit values and number of divisional lines for the x-axis, first set this attribute to false. That will disable automatic adjustment of divisional lines.
clickURL	Text	Any	The entire chart can now act as a hotspot. Use this URL to define the hotspot link for the chart. The link can be specified in Exago Link format.
clickURLOverridesPlotLinks	True/False	0/1	Sets whether the `clickURL` attribute (that sets a link to which the user is directed when the chart is clicked) overrides the `link` attribute (that sets a link to which the user is directed when a data plot is clicked). Default value: 0 (`clickURL` does not override `link`)
setAdaptiveYMin	True/False	0/1	This attribute lets you set whether the y-axis lower limit will be 0 (in case of all positive values on chart) or should the y-axis lower limit adapt itself to a different figure based on values provided to the chart.
setAdaptiveXMin	True/False	0/1	This attribute lets you set whether the x-axis lower limit will be 0 (in case of all positive values on chart) or should the x-axis lower limit adapt itself to a different figure based on values provided to the chart.
showRegressionLine	True/False	0/1	This attribute when set to ‘1’ draws regression lines for all the datasets in the chart.
showYOnX	True/False	0/1	When it is set to ‘1’ the regression lines are drawn using Y On X mode and when the attribute is set to ‘0’ the regression lines are drawn using X On Y mode. By default, this attribute is set to ‘1’.
regressionLineColor	Color	Hex Color Code	This attribute allows you to set the color of all the regression lines in a chart.
regressionLineThickness	Number		This attribute allows you to set the thickness of all the regression lines in a chart.
regressionLineAlpha	Number	0 – 100	This attribute allows you to set the transparency of all the regression lines in a chart.
minBubbleRadius	Number	Any	This attribute lets you define a default minimum radius for the bubbles. This is needed to ensure that all bubbles are visible.
hasRTLText	Number	Any	This attribute, when set to `1`, indicates to the chart that the text (rendered on the chart) may contain RTL characters and the textual display has to be managed accordingly.
plotHighlightEffect	Text	Any	This attribute lets you enable/disable the highlight effect, in the form of a `fadeout`, for the data plots corresponding to a legend item. When this attribute is enabled and the mouse pointer is hovered over a legend item label, plots belonging to the other data series fadeout, by reducing their opacity. The fadeout effect can be customized by specifying the fadeout color and opacity using the `color` and `alpha` attributes. Eg. `fadeout|color=#ff0000, alpha=60`
showPrintMenuItem	True/False	0/1	Whether to show “Print Chart” item in the context menu of the chart? Even if you opt to hide the item in context menu, you can still opt to invoke `print()` JavaScript method of the chart to print the same.
theme	Text	‘fusion’, ‘gammel’, ‘candy’, ‘ocean’, ‘zune’, ‘carbon’, ‘umber’	This attribute changes the theme of the chart. There are 7 types of themes which have been made according to the different color combinations.

Chart Message-related Attributes

These attributes let you set and configure custom chart messages, using text as well as images. These attributes are supported in Exago constructor (`Exago({ })`).

Attribute	Type	Value	Description
baseChartMessageFont	Text	Any	This attribute allows to set a custom font for all chart messages.
baseChartMessageFontSize	Number	In pixels	This attribute allows to set a custom font size for all chart messages.
baseChartMessageColor	Color	Hex Color Code	This attribute allows to set a custom font color for all chart messages.
baseChartMessageImageHAlign	Text	left, middle, right	This attribute allows to set a custom horizontal alignment for all images displayed as chart messages. Default value: middle
baseChartMessageImageVAlign	Text	top, middle, bottom	This attribute allows to set a custom vertical alignment for all images displayed as chart messages. Default value: middle
baseChartMessageImageAlpha	Number	0 – 100	This attribute allows to set a transparency for all images displayed as chart messages. Default value: 100
baseChartMessageImageScale	Number	0-300	This attribute allows to set a scale for magnifying all images displayed as chart messages. Default value: 100
loadMessage	Text	Any	This attribute allows to set the message to be displayed when a chart begins to load. To display an image as the chart message, prefix `I-` to the image URL.
loadMessageFont	Text	Font Name	This attribute allows to set the font for the message displayed when a chart begins to load.
loadMessageFontSize	Number	In pixels	This attribute allows to set the font size for the message displayed when a chart begins to load.
loadMessageColor	Color	Hex Color Code	This attribute allows to set the font color for the message displayed when a chart begins to load.
loadMessageImageHAlign	Text	left, middle, right	If an image is displayed as the chart `loadMessage`, this attribute allows to set a custom horizontal alignment for the image. Default value: value assigned to the `baseChartMessageImageHAlign` attribute
loadMessageImageVAlign	Text	top, middle, bottom	If an image is displayed as the chart `loadMessage`, this attribute allows to set a custom vertical alignment for the image. Default value: value assigned to the `baseChartMessageImageVAlign` attribute
loadMessageImageAlpha	Number	0 – 100	If an image is displayed as the chart `loadMessage`, this attribute allows to set the transparency of the image. Default value: 100
loadMessageImageScale	Number	0-300	If an image is displayed as the chart `loadMessage`, this attribute allows to set the scale for magnifying the image. Default value: 100
typeNotSupportedMessage	Text	Any	This attribute allows to set the message to be displayed when the specified chart type is not supported. To display an image as the chart message, prefix `I-` to the image URL.
typeNotSupportedMessageFont	Text	Font Name	This attribute allows to set the font for the message displayed when the specified chart type is not supported.
typeNotSupportedMessageFontSize	Number	In pixels	This attribute allows to set the font size for the message displayed when the specified chart type is not supported.
typeNotSupportedMessageColor	Color	Hex Color Code	This attribute allows to set the font color for the message displayed when the specified chart type is not supported.
typeNotSupportedMessageImageHAlign	Text	left, middle, right	If an image is displayed as the chart `typeNotSupportedMessage`, this attribute allows to set a custom horizontal alignment for the image. Default value: value assigned to the `baseChartMessageImageHAlign` attribute
typeNotSupportedMessageImageVAlign	Text	top, middle, bottom	If an image is displayed as the chart `typeNotSupportedMessage`, this attribute allows to set a custom vertical alignment for the image. Default value: value assigned to the `baseChartMessageImageVAlign` attribute
typeNotSupportedMessageImageAlpha	Number	0 – 100	If an image is displayed as the chart `typeNotSupportedMessage`, this attribute allows to set the transparency of the image. Default value: 100
typeNotSupportedMessageImageScale	Number	0-300	If an image is displayed as the chart `typeNotSupportedMessage`, this attribute allows to set the scale for magnifying the image. Default value: 100
renderErrorMessage	Text	Any	This attribute allows to set the message to be displayed if an error is encountered while rendering the chart. To display an image as the chart message, prefix `I-` to the image URL.
renderErrorMessageFont	Text	Font Name	This attribute allows to set a font for the message displayed if an error is encountered while rendering the chart.
renderErrorMessageFontSize	Number	In pixels	This attribute allows to set the font size for the message displayed if an error is encountered while rendering the chart.
renderErrorMessageColor	Color	Hex Color Code	This attribute allows to set the font color for the message displayed if an error is encountered while rendering the chart.
renderErrorMessageImageHAlign	Text	left, middle, right	If an image is displayed as the chart `renderErrorMessage`, this attribute allows to set a custom horizontal alignment for the image. Default value: value assigned to the `baseChartMessageImageHAlign` attribute
renderErrorMessageImageVAlign	Text	top, middle, bottom	If an image is displayed as the chart `renderErrorMessage`, this attribute allows to set a custom vertical alignment for the image. Default value: value assigned to the `baseChartMessageImageVAlign` attribute
renderErrorMessageImageAlpha	Number	0 – 100	If an image is displayed as the chart `renderErrorMessage`, this attribute allows to set the transparency of the image. Default value: 100
renderErrorMessageImageScale	Number	0-300	If an image is displayed as the chart `renderErrorMessage`, this attribute allows to set the scale for magnifying the image. Default value: 100
dataLoadStartMessage	Text	Any	This attribute allows to set the message to be displayed when chart data begins loading. To display an image as the chart message, prefix `I-` to the image URL.
dataLoadStartMessageFont	Text	Font Name	This attribute allows to set a font for the message displayed when chart data begins loading.
dataLoadStartMessageFontSize	Text	In pixels	This attribute allows to set the font size for the message displayed when chart data begins loading.
dataLoadStartMessageColor	Color	Hex Color Code	This attribute allows to set the font color for the message displayed when chart data begins loading.
dataLoadStartMessageImageHAlign	Text	left, middle, right	If an image is displayed as the chart `dataLoadStartMessage`, this attribute allows to set a custom horizontal alignment for the image. Default value: value assigned to the `baseChartMessageImageHAlign` attribute
dataLoadStartMessageImageVAlign	Text	top, middle, bottom	If an image is displayed as the chart `dataLoadStartMessage`, this attribute allows to set a custom vertical alignment for the image. Default value: value assigned to the `baseChartMessageImageVAlign` attribute
dataLoadStartMessageImageAlpha	Number	0 – 100	If an image is displayed as the chart `dataLoadStartMessage`, this attribute allows to set the transparency of the image. Default value: 100
dataLoadStartMessageImageScale	Number	0-300	If an image is displayed as the chart `dataLoadStartMessage`, this attribute allows to set the scale for magnifying the image. Default value: 100
dataEmptyMessage	Text	Any	This attribute allows to set the message to be displayed if the data loaded for a chart is empty. To display an image as the chart message, prefix `I-` to the image URL.
dataEmptyMessageFont	Text	Font Name	This attribute allows to set the font for the message displayed if the data loaded for a chart is empty
dataEmptyMessageFontSize	Number	In pixels	This attribute allows to set the font size for the message displayed if the data loaded for a chart is empty.
dataEmptyMessageColor	Color	Hex Color Code	This attribute allows to set the font color for the message displayed if the data loaded for a chart is empty.
dataEmptyMessageImageHAlign	Text	left, middle, right	If an image is displayed as the chart `dataEmptyMessage`, this attribute allows to set a custom horizontal alignment for the image. Default value: value assigned to the `baseChartMessageImageHAlign` attribute
dataEmptyMessageImageVAlign	Text	top, middle, bottom	If an image is displayed as the chart `dataEmptyMessage`, this attribute allows to set a custom vertical alignment for the image. Default value: value assigned to the `baseChartMessageImageVAlign` attribute
dataEmptyMessageImageAlpha	Number	0 – 100	If an image is displayed as the chart `dataEmptyMessage`, this attribute allows to set the transparency of the image. Default value: 100
dataEmptyMessageImageScale	Number	0-300	If an image is displayed as the chart `dataEmptyMessage`, this attribute allows to set the scale for magnifying the image. Default value: 100
dataLoadErrorMessage	Text	Any	This attribute allows to set the message to be displayed if an error is encountered while loading chart data. To display an image as the chart message, prefix `I-` to the image URL.
dataLoadErrorMessageFont	Text	Font Name	This attribute allows to set a font for the message displayed if an error is encountered while loading chart data.
dataLoadErrorMessageFontSize	Number	In pixels	This attribute allows to set the font size for the message displayed if an error is encountered while loading chart data.
dataLoadErrorMessageColor	Color	Hex Color Code	This attribute allows to set the font color for the message displayed if an error is encountered while loading chart data.
dataLoadErrorMessageImageHAlign	Text	left, middle, right	If an image is displayed as the chart `dataLoadErrorMessage`, this attribute allows to set a custom horizontal alignment for the image. Default value: value assigned to the `baseChartMessageImageHAlign` attribute
dataLoadErrorMessageImageVAlign	Text	top, middle, bottom	If an image is displayed as the chart `dataLoadErrorMessage`, this attribute allows to set a custom vertical alignment for the image. Default value: value assigned to the `baseChartMessageImageVAlign` attribute
dataLoadErrorMessageImageAlpha	Number	0 – 100	If an image is displayed as the chart `dataLoadErrorMessage`, this attribute allows to set the transparency of the image. Default value: 100
dataLoadErrorMessageImageScale	Number	0-300	If an image is displayed as the chart `dataLoadErrorMessage`, this attribute allows to set the scale for magnifying the image. Default value: 100
dataInvalidMessage	Text	Any	This attribute allows to set the message to be displayed if the data to be loaded for the chart is invalid. To display an image as the chart message, prefix `I-` to the image URL.
dataInvalidMessageFont	Text	Font Name	This attribute allows to set the font for the message displayed if the specified chart data is invalid.
dataInvalidMessageFontSize	Number	In pixels	This attribute allows to set the font size for the message displayed if the specified chart data is invalid.
dataInvalidMessageColor	Color	Hex Color Code	This attribute allows to set the font color for the message displayed if the specified chart data is invalid.
dataInvalidMessageImageHAlign	Text	left, middle, right	If an image is displayed as the chart `dataInvalidMessage`, this attribute allows to set a custom horizontal alignment for the image. Default value: value assigned to the `baseChartMessageImageHAlign` attribute
dataInvalidMessageImageVAlign	Text	top, middle, bottom	If an image is displayed as the chart `dataInvalidMessage`, this attribute allows to set a custom vertical alignment for the image. Default value: value assigned to the `baseChartMessageImageVAlign` attribute
dataInvalidMessageImageAlpha	Number	0 – 100	If an image is displayed as the chart `dataInvalidMessage`, this attribute allows to set the transparency of the image. Default value: 100
dataInvalidMessageImageScale	Number	0-300	If an image is displayed as the chart `dataInvalidMessage`, this attribute allows to set the scale for magnifying the image. Default value: 100

Chart Titles and Axis Names

Using these attributes, you can set the various headings and titles of chart like caption, sub-caption, x-axis and y-axis names etc.

Attribute	Type	Value	Description
caption	Text	Any	Caption of the chart.
subCaption	Text	Any	Sub-caption of the chart.
xAxisName	Text	Any	X-axis title of the chart.
yAxisName	Text	Any	Y-axis title of the chart.

Chart Caption Cosmetics

These attributes let you configure the cosmetics of chart caption and sub-caption.

Attribute	Type	Value	Description
captionAlignment	Text	“left”, “center”, “right”	Sets horizontal alignment of caption
captionOnTop	True/False	0/1	Whether caption should be on top of the data plot area
captionFontSize	Number	6 – 72	Sets the caption font size in pixels
subCaptionFontSize	Number	6 – 72	Sets the sub-caption font size (in pixels)
captionFont	Text	Font Name	Sets the caption font family
subCaptionFont	Text	Font Name	Sets the sub-caption font family
captionFontColor	Color	Hex Color Code	Sets the caption font color
subCaptionFontColor	Color	Hex Color Code	Sets the sub-caption font color
captionFontBold	True/False	0/1	Whether the caption font should be displayed in bold
subCaptionFontBold	True/False	0/1	Whether the sub caption font should be displayed in bold
alignCaptionWithCanvas	True/False	0/1	Whether the caption is aligned with the canvas. Else, it will be aligned with the entire chart area
captionHorizontalPadding	Number	In Pixels	If caption is not centre aligned, lets you configure the padding (in pixels) from either edge. Will be ignored if caption is centre aligned.

Chart Axis Configuration Attributes

Using these attributes, you can set and configure x-axis labels, y-axis values and set chart cosmetics for the axis like color, alpha, etc.

Attribute	Type	Value	Description
showxaxisline	True/False	0/1	This attribute if set to _0_, hides the x-axis of the chart. Default value: 1
showXAxisValues	True/False	0/1	Exago x-axis is divided into horizontal sections using div (divisional) lines. Each div line assumes a value based on its position. Using this attribute you can set whether to show those div line (x-axis) values or not. This attribute shows or hides the x-axis divisional lines and limits. When specified the values of `showVLimits` and `showVDivLineValues` overrides the value of this attribute.
xAxisPosition	Text	Top, Bottom	This attribute sets the position of the x-axis in the chart. Default value: Bottom
yAxisPosition	Text	Left, Right	This attribute sets the position of the y-axis in the chart. Default value: Left
xAxisLineColor	Color	Hex Color Code	Sets color of the x-axis of the chart.
xaxislinethickness	Number	In Pixels	Sets the thickness of the x-axis line of the chart.
xAxisLabelMode	Text	AUTO CATEGORIES MIXED	This attribute is used to render the x-axis labels in three different modes. The modes are as following: AUTO – Allows the x-axis labels to inherit the properties of y-axis (numeric calculations), ignoring the properties of the `categories` object if present in the data. CATEGORIES – This mode is the default mode of `xAxisLabelMode`. It allows the chart to show the properties of the `categories` object on the x-axis labels. MIXED – Allows the chart to show both the properties of y-axis (numeric calculations) and the `categories` object on the x-axis simultaneously.
xAxisValuesStep	Number	1 or above	By default, all div lines show their values. However, you can opt to display every x(th) div line value using this attribute.
xAxisMinValue	Number	Numeric Value	The bubble/scatter chart have both x and y axis as numeric. This attribute lets you explicitly set the x-axis lower limit. If you do not specify this value, Exago will automatically calculate the best value for you.
xAxisMaxValue	Number	Numeric Value	The bubble/scatter chart have both x and y axis as numeric. This attribute lets you explicitly set the x-axis upper limit. If you do not specify this value, Exago will automatically calculate the best value for you.
showyaxisline	True/False	0/1	This attribute if set to _0_, hides the y-axis of the chart. Default value: 1
showYAxisValues	True/False	0/1	Exago y-axis is divided into vertical sections using div (divisional) lines. Each div line assumes a value based on its position. Using this attribute you can set whether to show those div line (y-axis) values or not. This attribute shows or hides the y-axis divisional lines and limits. The values of `showLimits` and `showDivLineValues`, if specified explicitly, overrides the value of this attribute.
yAxisLineColor	Color	Hex Color Code	Sets color of the y-axis of the chart.
yAxisLineThickness	Number	In Pixels	Sets the thickness of the y-axis line of the chart.
rotateYAxisName	True/False	0/1	If you do not wish to rotate y-axis name, set this as 0. It specifically comes to use when you’ve the special characters (UTF-8) in your y-axis name that do not show up in rotated mode.
yAxisValuesStep	Number	1 or above	By default, all div lines show their values. However, you can opt to display every x(th) div line value using this attribute.
yAxisNameWidth	Number	(In Pixels)	If you opt to not rotate y-axis name, you can choose a maximum width that will be applied to y-axis name.
yAxisMinValue	Number	Numeric Value	This attribute helps you explicitly set the lower limit of the chart. If you don’t specify this value, it is automatically calculated by Exago based on the data provided by you.
yAxisMaxValue	Number	Numeric Value	This attribute helps you explicitly set the upper limit of the chart. If you don’t specify this value, it is automatically calculated by Exago based on the data provided by you.
forceXAxisValueDecimals	True/False	0/1	Whether to forcefully attach decimal places to all x-axis values. For example, If you limit the maximum number of decimal digits to 2, a number like 55.345 will be rounded to 55.34. This does not mean that all x-axis numbers will be displayed with a fixed number of decimal places. For instance 55 will not be displayed as 55.00 and 55.1 will not become 55.10. In order to have fixed number of decimal places attached to all x-axis numbers, set this attribute to 1.
forceYAxisValueDecimals	True/False	0/1	Whether to forcefully attach decimal places to all y-axis values. For example, If you limit the maximum number of decimal digits to 2, a number like 55.345 will be rounded to 55.34. This does not mean that all y-axis numbers will be displayed with a fixed number of decimal places. For instance 55 will not be displayed as 55.00 and 55.1 will not become 55.10. In order to have fixed number of decimal places attached to all y-axis numbers, set this attribute to 1.
xAxisValueDecimals	Number	0-10	If you’ve opted not to adjust vertical div lines, you can specify the decimal precision of the div line values using this attribute.
yAxisValueDecimals	Number	0-10	If you’ve opted to not adjust div lines, you can specify the div line values decimal precision using this attribute.
reverseXaxis	True/False	0/1	You can reverse the x-axis by setting this attribute to `1`. The x-axis values will appear in decreasing order from left to right. Default value: `0`

x-Axis Name Cosmetics

To configure the font cosmetics of x-axis name (title), you can use the following attributes.

Attribute	Type	Value	Description
xAxisNameFont	Text	Font Name	Sets the x-axis font family for the text
xAxisNameFontColor	Color	Hex Color Code	Sets the x-axis font color
xAxisNameFontSize	Number	6 – 72	Specifies the x-axis font size
xAxisNameFontBold	True/False	0/1	Whether x-axis font should be bold
xAxisNameFontItalic	True/False	0/1	Whether x-axis font should be italicized
xAxisNameBgColor	Color	Hex Color Code	Sets the background color for x-axis text
xAxisNameBorderColor	Color	Hex Color Code	Sets the border around the x-axis text
xAxisNameAlpha	Number	0 – 100	Sets the x-axis alpha including font and background
xAxisNameFontAlpha	Number	0 – 100	Sets the x-axis font alpha
xAxisNameBgAlpha	Number	0 – 100	Sets the x-axis background alpha
xAxisNameBorderAlpha	Number	0 – 100	Sets the x-axis border alpha
xAxisNameBorderPadding	Number	In Pixels	Sets the x-axis border padding
xAxisNameBorderRadius	Number	In Pixels	Sets the x-axis border radius
xAxisNameBorderThickness	Number	In Pixels	Sets the x-axis border thickness
xAxisNameBorderDashed	True/False	0/1	Whether the border around the x-axis name should be rendered using dashed lines. Default value: 0 (border rendered using straight lines)
xAxisNameBorderDashLen	Number	In pixels	Sets the length of each dash when the border around the x-axis name is rendered using dashed lines.
xAxisNameBorderDashGap	Number	In pixels	Sets the gap between consecutive dashes when the border around the x-axis name is rendered using dashed lines.

y-Axis Name Cosmetics

To configure the font cosmetics of y-axis name (title), you can use the following attributes.

Attribute	Type	Value	Description
yAxisNameFont	Text	Font Name	Sets the y-axis (primary / secondary) font family for the text
yAxisNameFontColor	Color	Hex Color Code	Sets the y-axis (primary / secondary) font color
yAxisNameFontSize	Number	6 – 72	Specifies the y-axis (primary / secondary) font size
yAxisNameFontBold	True/False	0/1	Whether y-axis (primary / secondary) font should be bold
yAxisNameFontItalic	True/False	0/1	Whether y-axis (primary / secondary) font should be italicized
yAxisNameBgColor	Color	Hex Color Code	Sets the background color for y-axis (primary / secondary) text
yAxisNameBorderColor	Color	Hex Color Code	Sets the border around the y-axis (primary / secondary) text
yAxisNameAlpha	Number	0 – 100	Sets the y-axis (primary / secondary) alpha including font and background
yAxisNameFontAlpha	Number	0 – 100	Sets the y-axis (primary / secondary) font alpha
yAxisNameBgAlpha	Number	0 – 100	Sets the y-axis (primary / secondary) background alpha
yAxisNameBorderAlpha	Number	0 – 100	Sets the y-axis (primary / secondary) border alpha
yAxisNameBorderPadding	Number	In Pixels	Sets the y-axis (primary / secondary) border padding
yAxisNameBorderRadius	Number	In Pixels	Sets the y-axis (primary / secondary) border radius
yAxisNameBorderThickness	Number	In Pixels	Sets the y-axis (primary / secondary) border thickness
yAxisNameBorderDashed	True/False	0/1	Whether the border around the y-axis name should be rendered using dashed lines. Default value: 0 (border rendered using straight lines)
yAxisNameBorderDashLen	Number	In pixels	Sets the length of each dash when the border around the y-axis name is rendered using dashed lines.
yAxisNameBorderDashGap	Number	In pixels	Sets the gap between two consecutive dashes when the border around the y-axis name is rendered using dashed lines.

Chart Cosmetics

The following attributes let you configure chart cosmetics like background color, background alpha, canvas color & alpha etc.

Attribute	Type	Value	Description
showBorder	True/False	0/1	Whether to show a border around the chart or not.
borderColor	Color	Hex Color Code	Border color of the chart.
borderThickness	Number	In Pixels	Border thickness of the chart.
borderAlpha	Number	0 – 100	Border alpha of the chart.
bgColor	Color	Hex Color Code	This attribute sets the background color for the chart. You can set any hex color code as the value of this attribute. To specify a gradient as background color, separate the hex color codes of each color in the gradient using comma. Example: `#FF5904, #FFFFFF`.
bgAlpha	Number	0 – 100	Sets the alpha (transparency) for the background. If you’ve opted for gradient background, you need to set a list of alpha(s) separated by comma.
bgRatio	Number	0 – 100	If you’ve opted for a gradient background, this attribute lets you set the ratio of each color constituent.
bgAngle	Number	0-360	Sets the angle of the background color, in case of a gradient.
bgImage	Text	Any	To place any image (JPG/PNG/GIF) as background of the chart, enter the (path and) name of the background image as a URL without quotes around it. It should be in the same domain as the chart.
bgImageAlpha	Number	0 – 100	This attribute specifies the opacity for the loaded background image.
bgImageDisplayMode	Text	stretch, tile, fit, fill, center, none	Helps you specify the mode in which the background image is to be displayed. Stretch – expands the image to fit the entire chart area, without maintaining original image constraints. Tile – the image is repeated as a pattern on the entire chart area. Fit – fits the image proportionately on the chart area. Fill -proportionately fills the entire chart area with the image. Center – the image is positioned at the center of the chart area. None – Default mode.
bgImageVAlign	Text	top, middle, bottom	Helps you to vertically align the background image.
bgImageHAlign	Text	left, middle, right	Helps you to horizontally align the background image.
bgImageScale	Number	0-300	Helps you magnify the background image.This attribute will only work when the attribute `bgImageDisplayMode` is set to none, center, or tile.
canvasBgColor	Color	Hex Color Code	This attribute sets the background color for the chart canvas. You can set any hex color code as the value of this attribute. To specify a gradient as canvas background color, separate the hex color codes of each color in the gradient using comma. Example: #FF5904, #FFFFFF.
canvasBgAlpha	Number	0 – 100	This attribute sets the background transparency for the chart canvas. For gradient, separate the alpha value using comma. Example: 15, 50.
canvasBgRatio	Numbers separated by comma	0 – 100	When a gradient is used to set the color of the canvas background, this attribute sets the ratio of the colors. Example : If the value of the `canvasBgColor` attribute is set as `#FF5904, #FFFFFF`, `canvasBgRatio` can be used to specify their ratio in the background.
canvasBgAngle	Number	0-360	Helps you specify canvas background angle in case of gradient.
canvasBorderColor	Color	Hex Color Code	Lets you specify canvas border color.
canvasBorderThickness	Number	0-5	Lets you specify canvas border thickness.
canvasBorderAlpha	Number	0 – 100	Lets you control transparency of canvas border.
logoURL	Text	URL	You can load an external logo (JPEG/PNG) to your chart, this attribute lets you specify the URL. Due to cross domain security restrictions it is advised to use a logo from the same domain name as your charts.
logoLeftMargin	Number	In Pixels	This attribute helps you set the amount of empty space that you want to put on the left side of your logo image. Nothing is rendered in this space.
logoTopMargin	Number	In Pixels	This attribute helps you set the amount of empty space that you want to put on top of your logo image. Nothing is rendered in this space.
logoPosition	Text	TL, TR, BL, BR, CC	Where to position the logo on the chart: TL – Top-left TR – Top-right BR – Bottom right BL – Bottom left CC – Center of screen
logoAlpha	Number	0 – 100	Once the logo has loaded on the chart, you can configure its opacity using this attribute.
logoScale	Number	0-300	You can also change the scale of an externally loaded logo at run-time by specifying a value for this parameter.
logoLink	Text	URL	If you want to link the logo to an external URL, specify the link in this attribute. The link can be in Exago Link format, allowing you to link to new windows, pop-ups, frames etc.

Quadrants

The following attributes let you configure different facets of quadrants like quadrant lines, quadrant labels and their various functionalities.

Attribute	Type	Value	Description
drawQuadrant	True/False	0/1	Whether to draw quadrants on the chart.
quadrantXVal	Number	Numeric Value	This attribute lets you set the position of the vertical quadrant line.
quadrantYVal	Number	Numeric Value	This attribute lets you set the position of the horizontal quadrant line.
quadrantLineColor	Color	Hex Color Code	Lets you set the color of the quadrant lines.
quadrantLineThickness	Number	In Pixels	Lets you set the thickness of the quadrant lines.
quadrantLineAlpha	Number	0 – 100	Lets you control the transparency of the quadrant lines.
quadrantLineDashed	True/False	0/1	Whether the quadrant line should be rendered as dashed lines. Default value: 0 (quadrant line rendered using straight lines)
quadrantLineDashLen	Number	In pixels	Sets the length of each dash when quadrant line is rendered as dashed lines.
quadrantLineDashGap	Number	In pixels	Sets the gap between consecutive dashes when quadrant line is rendered as dashed lines.
quadrantLabelTL	Text	Any	This attribute lets you specify the label text of the top-left quadrant.
quadrantLabelTR	Text	Any	This attribute lets you specify the label text of the top-right quadrant.
quadrantLabelBL	Text	Any	This attribute lets you specify the label text of the bottom-left quadrant.
quadrantLabelBR	Text	Any	This attribute lets you specify the label text of the bottom-right quadrant.
quadrantLabelFont	Text	Font Name	This attribute lets you set the font for all quadrant labels. Default value: Base font
quadrantLabelTLFont	Text	Font Name	This attribute lets you set the font for the top-left quadrant label. Default value: Base font
quadrantLabelTRFont	Text	Font Name	This attribute lets you set the font for the top-right quadrant label. Default value: Base font
quadrantLabelBLFont	Text	Font Name	This attribute lets you set the font for the bottom-left quadrant label. Default value: Base font
quadrantLabelBRFont	Text	Font Name	This attribute lets you set the font for the bottom-right quadrant label. Default value: Base font
quadrantLabelFontColor	Hex Color Code	Any	This attribute lets you set the font color for all quadrant labels. Default value: Base font color
quadrantLabelTLFontColor	Hex Color Code	Any	This attribute lets you set the font color for the top-left quadrant label. Default value: Base font color
quadrantLabelTRFontColor	Hex Color Code	Any	This attribute lets you set the font color for the top-right quadrant label. Default value: Base font color
quadrantLabelBLFontColor	Hex Color Code	Any	This attribute lets you set the font color for the bottom-left quadrant label. Default value: Base font color
quadrantLabelBRFontColor	Hex Color Code	Any	This attribute lets you set the font color for the bottom-right quadrant label. Default value: Base font color
quadrantLabelFontAlpha	Number	0 – 100	This attribute lets you set the font transparency of all quadrant labels. Default value: 100
quadrantLabelTLFontAlpha	Number	0 – 100	This attribute lets you set the font transparency of the top-left quadrant label. Default value: 100
quadrantLabelTRFontAlpha	Number	0 – 100	This attribute lets you set the font transparency of the top-right quadrant label. Default value: 100
quadrantLabelBLFontAlpha	Number	0 – 100	This attribute lets you set the font transparency of the bottom-left quadrant label. Default value: 100
quadrantLabelBRFontAlpha	Number	0 – 100	This attribute lets you set the font transparency of the bottom-right quadrant label. Default value: 100
quadrantLabelFontSize	Number	Any	This attribute lets you set the font size for all quadrant labels. Default value: Base font size
quadrantLabelTLFontSize	Number	Any	This attribute lets you set the font size for the top-left quadrant label. Default value: Base font size
quadrantLabelTRFontSize	Number	Any	This attribute lets you set the font size for the top-right quadrant label. Default value: Base font size
quadrantLabelBLFontSize	Number	Any	This attribute lets you set the font size for the bottom-left quadrant label. Default value: Base font size
quadrantLabelBRFontSize	Number	Any	This attribute lets you set the font size for the bottom-right quadrant label. Default value: Base font size
quadrantLabelFontBold	True/False	0/1	This attribute lets you specify whether the label text for all quadrants will be bold formatted. Default value: 0 (not formatted in bold)
quadrantLabelTLFontBold	True/False	0/1	This attribute lets you specify whether the top-left quadrant label text will be bold formatted. Default value: 0 (not formatted in bold)
quadrantLabelTRFontBold	True/False	0/1	This attribute lets you specify whether the top-right quadrant label text will be bold formatted. Default value: 0 (not formatted in bold)
quadrantLabelBLFontBold	True/False	0/1	This attribute lets you specify whether the bottom-left quadrant label text will be bold formatted. Default value: 0 (not formatted in bold)
quadrantLabelBRFontBold	True/False	0/1	This attribute lets you specify whether the bottom-right quadrant label text will be bold formatted. Default value: 0 (not formatted in bold)
quadrantLabelFontItalic	True/False	0/1	This attribute lets you specify whether the label text for all quadrants will be italicized. Default value: 0 (not italicized)
quadrantLabelTLFontItalic	True/False	0/1	This attribute lets you specify whether the top-left quadrant label text will be italicized. Default value: 0 (not italicized)
quadrantLabelTRFontItalic	True/False	0/1	This attribute lets you specify whether the top-right quadrant label text will be italicized. Default value: 0 (not italicized)
quadrantLabelBLFontItalic	True/False	0/1	This attribute lets you specify whether the bottom-left quadrant label text will be italicized. Default value: 0 (not italicized)
quadrantLabelBRFontItalic	True/False	0/1	This attribute lets you specify whether the bottom-right quadrant label text will be italicized. Default value: 0 (not italicized)
quadrantLabelBorderColor	Hex Color Code	Any	This attribute lets you set the border color for all quadrant labels. Default value: none
quadrantLabelTLBorderColor	Hex Color Code	Any	This attribute lets you set the color of the top-left quadrant label border. Default value: none
quadrantLabelTRBorderColor	Hex Color Code	Any	This attribute lets you set the color of the top-right quadrant label border. Default value: none
quadrantLabelBLBorderColor	Hex Color Code	Any	This attribute lets you set the color of the bottom-left quadrant label border. Default value: none
quadrantLabelBRBorderColor	Hex Color Code	Any	This attribute lets you set the color of the bottom-right quadrant label border. Default value: none
quadrantLabelBorderAlpha	Number	0 – 100	This attribute lets you set the border transpareny for all quadrant labels. Default value: 100
quadrantLabelTLBorderAlpha	Number	0 – 100	This attribute lets you set the transpareny of the top-left quadrant label border. Default value: 100
quadrantLabelTRBorderAlpha	Number	0 – 100	This attribute lets you set the transpareny of the top-right quadrant label border. Default value: 100
quadrantLabelBLBorderAlpha	Number	0 – 100	This attribute lets you set the transpareny of the bottom-left quadrant label border. Default value: 100
quadrantLabelBRBorderAlpha	Number	0 – 100	This attribute lets you set the transpareny of the bottom-right quadrant label border. Default value: 100
quadrantLabelBorderThickness	Number	1-5	This attribute lets you set the border thickness for all quadrant labels. Default value: 1
quadrantLabelTLBorderThickness	Number	1-5	This attribute lets you set the thickness of the top-left quadrant label border. Default value: 1
quadrantLabelTRBorderThickness	Number	1-5	This attribute lets you set the thickness of the top-right quadrant label border. Default value: 1
quadrantLabelBLBorderThickness	Number	1-5	This attribute lets you set the thickness of the bottom-left quadrant label border. Default value: 1
quadrantLabelBRBorderThickness	Number	1-5	This attribute lets you set the thickness of the bottom-right quadrant label border. Default value: 1
quadrantLabelBorderPadding	Number	Any	This attribute lets you set the border padding for all quadrant labels. Default value: 2
quadrantLabelTLBorderPadding	Number	Any	This attribute lets you set the padding for the top-left quadrant label border. Default value: 2
quadrantLabelTRBorderPadding	Number	Any	This attribute lets you set the padding for the top-right quadrant label border. Default value: 2
quadrantLabelBLBorderPadding	Number	Any	This attribute lets you set the padding for the bottom-left quadrant label border. Default value: 2
quadrantLabelBRBorderPadding	Number	Any	This attribute lets you set the padding for the bottom-right quadrant label border. Default value: 2
quadrantLabelBorderRadius	Number	Any	This attribute lets you set the border radius for all quadrant labels. Default value: 0
quadrantLabelTLBorderRadius	Number	Any	This attribute lets you set the radius of the top-left quadrant label border. Default value: 0
quadrantLabelTRBorderRadius	Number	Any	This attribute lets you set the radius of the top-right quadrant label border. Default value: 0
quadrantLabelBLBorderRadius	Number	Any	This attribute lets you set the radius of the bottom-left quadrant label border. Default value: 0
quadrantLabelBRBorderRadius	Number	Any	This attribute lets you set the radius of the bottom-right quadrant label border. Default value: 0
quadrantLabelBorderDashed	True/False	0/1	This attribute lets you specify whether all quadrant label borders will be drawn as dashed lines. Default value: 0 (drawn as a straight line)
quadrantLabelTLBorderDashed	True/False	0/1	This attribute lets you specify whether the top-left quadrant label border will be drawn as a dashed-line. Default value: 0 (drawn as a straight line)
quadrantLabelTRBorderDashed	True/False	0/1	This attribute lets you specify whether the top-right quadrant label border will be drawn as a dashed-line. Default value: 0 (drawn as a straight line)
quadrantLabelBLBorderDashed	True/False	0/1	This attribute lets you specify whether the bottom-left quadrant label border will be drawn as a dashed-line. Default value: 0 (drawn as a straight line)
quadrantLabelBRBorderDashed	True/False	0/1	This attribute lets you specify whether the bottom-right quadrant label border will be drawn as a dashed-line. Default value: 0 (drawn as a straight line)
quadrantLabelBorderDashlen	Number	In pixels	This attribute lets you set the length of each dash for all quadrant label borders, if the borders are drawn as a dashed line. Default value: 4
quadrantLabelTLBorderDashlen	Number	In pixels	This attribute lets you set the length of each dash, if the top-left quadrant label border is drawn as a dashed line. Default value: 4
quadrantLabelTRBorderDashlen	Number	In pixels	This attribute lets you set the length of each dash, if the top-right quadrant label border is drawn as a dashed line. Default value: 4
quadrantLabelBLBorderDashlen	Number	In pixels	This attribute lets you set the length of each dash, if the bottom-left quadrant label border is drawn as a dashed line. Default value: 4
quadrantLabelBRBorderDashlen	Number	In pixels	This attribute lets you set the length of each dash, if the bottom-right quadrant label border is drawn as a dashed line. Default value: 4
quadrantLabelBorderDashgap	Number	In pixels	This attribute lets you set the distance between each dash for all quadrant label borders, if the borders are drawn as a dashed line. Default value: 2
quadrantLabelTLBorderDashgap	Number	In pixels	This attribute lets you set the distance between each dash, if the top-left quadrant label border is drawn as a dashed line. Default value: 2
quadrantLabelTRBorderDashgap	Number	In pixels	This attribute lets you set the distance between each dash, if the top-right quadrant label border is drawn as a dashed line. Default value: 2
quadrantLabelBLBorderDashgap	Number	In pixels	This attribute lets you set the distance between each dash, if the bottom-left quadrant label border is drawn as a dashed line. Default value: 2
quadrantLabelBRBorderDashgap	Number	In pixels	This attribute lets you set the distance between each dash, if the bottom-right quadrant label border is drawn as a dashed line. Default value: 2
quadrantLabelBgColor	Color	Hex Color Code	This attribute lets you set the background color for all quadrant labels. Default value: None
quadrantLabelTLBgColor	Hex Color Code	Any	This attribute lets you set the background color for the top-left quadrant label. Default value: None
quadrantLabelTRBgColor	Hex Color Code	Any	This attribute lets you set the background color for the top-right quadrant label. Default value: None
quadrantLabelBLBgColor	Hex Color Code	Any	This attribute lets you set the background color for the bottom-left quadrant label. Default value: None
quadrantLabelBRBgColor	Hex Color Code	Any	This attribute lets you set the background color for the bottom-right quadrant label. Default value: None
quadrantLabelBgAlpha	Number	0 – 100	This attribute lets you set the background transparency for all quadrant labels. Default value: 100
quadrantLabelTLBgAlpha	Number	0 – 100	This attribute lets you set the background transparency for the top-left quadrant label. Default value: 100
quadrantLabelTRBgAlpha	Number	0 – 100	This attribute lets you set the background transparency for the top-right quadrant label. Default value: 100
quadrantLabelBLBgAlpha	Number	0 – 100	This attribute lets you set the background transparency for the bottom-left quadrant label. Default value: 100
quadrantLabelBRBgAlpha	Number	0 – 100	This attribute lets you set the background transparency for the bottom-right quadrant label. Default value: 100
quadrantLabelPadding	Number	In Pixels	This attribute lets you control the space between quadrant labels and the associated quadrant lines.

Data Plot Cosmetics

These attributes let you configure how your plot (columns, lines, area, pie or any data that you’re plotting) will appear on the chart. If the plots can show borders, you can control the border properties using the attributes listed below. Or, if they support gradient fills, you can again configure various properties of the gradient using these attributes. Various other controls over plot cosmetics can be attained using this set of attributes.

Attribute	Type	Value	Description
showPlotBorder	True/False	0/1	Whether the column, area, pie etc. border will show up.
plotBorderColor	Color	Hex Color Code	Color for column, area, pie border
plotBorderThickness	Number	0-5	Thickness for column, area, pie border
plotBorderAlpha	Number	0 – 100	Alpha for column, area, pie border
plotFillAlpha	Number	0 – 100	If you’ve opted to fill the plot (column, area etc.) as gradient, this attribute lets you set the fill alpha for gradient.

Data Value Cosmetics

These attributes let you configure font, background and border cosmetics, of value text-field that appear for each data plot.

Attribute	Type	Value	Description
valueFont	Text	Font Name	Sets the font of the values in the chart
valueFontColor	Color	Hex Color Code	Specifies the value font color
valueFontSize	Number	6 – 72	Specifies the value font size
valueFontBold	True/False	0/1	Whether value font should be bold
valueFontItalic	True/False	0/1	Whether value font should be italicized
valueBgColor	Color	Hex Color Code	Sets the background color for value text
valueBorderColor	Color	Hex Color Code	Sets the border color around the value text
valueAlpha	Number	0 – 100	Sets the value alpha including font and background
valueFontAlpha	Number	0 – 100	Sets the value font alpha
valueBgAlpha	Number	0 – 100	Sets the value background alpha
valueBorderAlpha	Number	0 – 100	Sets the value border alpha
valueBorderThickness	Number	In Pixels	Sets the value border thickness
valueBorderPadding	Number	In Pixels	Sets the padding between the value and its surrounding border
valueBorderRadius	Number	In Pixels	Sets the value border radius
valueBorderDashed	True/False	0/1	Whether the border around the data values should be rendered using dashed lines. Default value: 0 (border rendered using straight lines)
valueBorderDashLen	Number	In pixels	Sets the length of each dash when the border around the data values is rendered using dashed lines.
valueBorderDashGap	Number	In pixels	Sets the gap between two consecutive dashes when the border around the data values is rendered using dashed lines.
textOutline	True/False	0/1	Set this attribute to `1` to draw a border on the data value text. Default value: 0
minRadiusForValue	Number	In Pixels	Set the minimum radius of a bubble, above which the data values will be visible.

Divisional Lines & Grids

Using this set of attributes, you can control the properties of divisional lines, zero plane and alternate color bands. Divisional Lines are horizontal or vertical lines running through the canvas. Each divisional line signifies a smaller unit of the entire axis thus aiding the users in interpreting the chart. The zero plane is a 2D/3D plane that signifies the 0 position on the chart. If there are no negative numbers on the chart, you won’t see a visible zero plane. Alternate color bands are colored blocks between two successive divisional lines.

Attribute	Type	Value	Description
numDivLines	Number	Numeric value > 0	Number of horizontal axis division lines that you want on the chart.
divLineColor	Color	Hex Color Code	Color for divisional lines.
divLineThickness	Number	1-5	Thickness of divisional lines.
divLineAlpha	Number	0 – 100	Alpha of divisional lines.
divLineDashed	True/False	0/1	Whether the divisional lines should be rendered as dashed lines. Default value: 0 (divisional lines rendered using straight lines)
divLineDashLen	Number	In pixels	Sets the length of each dash when divisional lines are rendered as dashed lines.
divLineDashGap	Number	In pixels	Sets the gap between two consecutive dashes when divisional lines are rendered as dashed lines.
showAlternateHGridColor	True/False	0/1	Whether to show alternate colored horizontal grid bands.
alternateHGridColor	Color	Hex Color Code	Color of the alternate horizontal grid bands.
alternateHGridAlpha	Number	0 – 100	Alpha (transparency) of the alternate horizontal grid bands.
numVDivLines	Number	Numeric value > 0	Number of vertical axis division lines that you want to display on the chart.
vDivLineColor	Color	Hex Color Code	Color for vertical divisional lines.
vDivLineThickness	Number	1-5	Thickness of vertical divisional lines.
vDivlineAlpha	Number	0 – 100	Transparency of the vertical divisional lines.
vDivLineDashed	True/False	0/1	Whether the vertical divisional lines should be rendered as dashed lines. Default value: 0 (vertical divisional lines using straight lines)
vDivLineDashLen	Number	In pixels	Sets the width of each dash when vertical divisional lines are rendered as dashed lines.
vDivLineDashGap	Number	In pixels	Sets the gap between two consecutive dashes when vertical divisional lines are rendered as dashed lines.
showAlternateVGridColor	True/False	0/1	Whether to show alternate colored vertical grid bands.
alternateVGridColor	Color	Hex Color Code	Color of the alternate vertical grid bands.
alternateVGridAlpha	Number	0 – 100	Transparency of the alternate vertical grid bands.
showZeroPlane	True/False	0/1	Whether to show zero plane. Zero Plane is the line/plane that appears at 0 y-position on canvas, when negative data is being shown on the chart.
showZeroPlaneValue	True/False	0/1	Allows you to show or hide the value on which the zero plane exists on the y-axis. By default, the value is displayed.
zeroPlaneColor	Color	Hex Color Code	Color for the Zero Plane.
zeroPlaneThickness	Number	In Pixels	Thickness of zero plane.
zeroPlaneAlpha	Number	0 – 100	Alpha of zero plane.
showVZeroPlane	True/False	0/1	Whether to show vertical zero plane. Zero Plane is the line/plane that appears at 0 x-position on canvas, when negative data is being shown on the chart.
vZeroPlaneColor	Color	Hex Color Code	Color of the vertical zero plane.
vZeroPlaneThickness	Number	In Pixels	Thickness of the vertical zero plane.
vZeroPlaneAlpha	Number	0 – 100	Transparency of the vertical zero plane.

Legend Properties

In bubble charts, the series name of each dataset shows up in the legend of the chart. If you do not need the legend, you can opt to hide the same. Also, the legend can be placed at the bottom of the chart or to the right of the chart. Using the attributes below, you can configure the functional and cosmetic properties of the legend.

Attribute	Type	Value	Description
showLegend	True/False	0/1	Whether to show legend on the chart.
legendItemFontBold	True/False	0/1	Whether legend keys should be displayed in bold
legendItemFont	Text	Font Name	Sets legend item font
legendItemFontSize	Number	6 – 72	Sets legend item font size
legendItemFontColor	Color	Hex Color Code	Sets legend item font color
legendItemHoverFontColor	Color	Hex Color Code	Sets legend item font color on hover
legendPosition	Text	bottom, right, top, top-left, top-right, bottom-left, bottom-right, left, left-top, left-bottom, right, right-top, right-bottom, and absolute	The legend can be plotted at different positions with respect to the chart. Note that if the value of `legendPosition` is set to `absolute`, you also need to set the coordinates of the legend. You can do that using the attributes `legendXPosition` and `legendYPosition`, both of which accept absolute or percentage values.
legendXPosition	Number	0 to chart width (in pixels)	When the value of `legendPosition` is set to `absolute`, use this attribute to set the X-coordinate of the legend. It accepts absolute or percentage values. By default, its value is set to `0`.
legendYPosition	Number	0 to chart height (in pixels)	When the value of `legendPosition` is set to `absolute`, use this attribute to set the Y-coordinate of the legend. It accepts absolute or percentage values. By default, its value is set to `0`.
legendNumRows	Number	Any	Sets the number of rows the legend should display.
legendNumColumns	Number	Any	Sets the number of columns the legend should display.
legendCaptionAlignment	Text	“left”, “center”, “right”	Sets the legend caption horizontal alignment .
legendCaptionFontBold	True/False	0/1	Whether legend caption should be displayed in bold
legendCaptionFont	Text	Font Name	Sets legend caption font
legendCaptionFontSize	Number	6 – 72	Sets legend caption font size
legendCaptionFontColor	Color	Hex Color Code	Sets legend caption font color
legendCaption	Text		You can add a caption for the entire legend by setting the same here.
legendItemHiddenColor	Color	Hex Color Code	Sets the color that applies on both text font and icon when they are in a disabled / hidden state
legendIconScale	Number	1-5	Scaling of legend icon is possible in Exago. This attribute lets you control the size of legend icon.
legendBgColor	Color	Hex Color Code	Background color for the legend.
legendBgAlpha	Number	0 – 100	Background alpha for the legend.
legendBorderColor	Color	Hex Color Code	Border Color for the legend.
legendBorderThickness	Number	In Pixels	Border thickness for the legend.
legendBorderAlpha	Number	0 – 100	Border alpha for the legend.
legendShadow	True/False	0/1	Whether to show a shadow for legend.
legendAllowDrag	True/False	0/1	The legend can be made drag-able by setting this attribute to 1. End viewers of the chart can drag the legend around on the chart.
legendScrollBgColor	Color	Hex Color Code	If you’ve too many items on the legend, a scroll bar shows up on the same. This attribute lets you configure the background color of the scroll bar.
interactiveLegend	True/False	0/1	This attribute lets you interact with the legend in your chart. When you click a legend key, the dataplots associated with that series are eliminated from the chart. Re-clicking the key causes the dataplots to reappear.
legendNumColumns	Number	Positive Integer	If your chart contains multiple series, the legend is displayed as a grid comprising of multiple legend keys. With the help of this attribute you can specify the number of columns that are to be displayed in the legend.
minimiseWrappingInLegend	True/False	0/1	Whether to minimize legend item text wrapping.
drawCustomLegendIcon	True/False	0/1	Specifies whether drawing a custom legend icon will be enabled. All legend icon customization attributes will work only if this feature is enabled. Default value: 0 (disabled)
legendIconBorderColor	Color	Hex Color Code	Sets the border color for the legend icon. Default value: Data plot border color
legendIconBgColor	Color	Hex Color Code	Sets the background color for the legend icon. Default value: Data plot fill color
legendIconAlpha	Number	0 – 100	Sets the legend icon transparency. Default value: 100
legendIconBgAlpha	Number	0 – 100	Sets the legend icon background transparency. Default value: 100
legendIconSides	Number	Any	Sets the number of sides for the legend icon. Default value: 4
legendIconBorderThickness	Number	1-5	Sets the thickness of the legend icon border. Default value: 1
legendIconStartAngle	Number	Any	Sets the starting angle of for drawing the legend icon. Default value: 45
alignLegendWithCanvas	True/False	0/1	This attribute if set to `0`, the legend box will be center aligned with respect to the entire width of the chart only if the total width of the legend box is more than the canvas width. By default, the legend box is center aligned with respect to the canvas width and it remains the same if the width of the legend box is less than the canvas width.

Number Formatting

Exago offers you a lot of options to format your numbers on the chart. Using the attributes below, you can control a myriad of options like: Formatting of commas and decimals Number prefixes and suffixes Decimal places to which the numbers will round to Scaling of numbers based on a user defined scale Custom number input formats

Attribute	Type	Value	Description
formatNumber	True/False	0/1	This configuration determines whether the numbers displayed on the chart will be formatted using commas, e.g., 40,000 if ‘formatNumber’: ‘1’; and 40000 if ‘formatNumber’: ‘0’;. The value of this attribute works only if `yFormatNumber` and `xFormatNumber` attributes are not specifically mentioned.
yFormatNumber	True/False	0/1	This configuration determines whether the numbers displayed on the y-axis of the chart will be formatted using commas, e.g., 40,000 if ‘formatNumber’: ‘1’; and 40000 if ‘formatNumber’: ‘0’;. If this attribute is not specifically mentioned, the chart inherits the default value from `formatNumber` attribute.
xFormatNumber	True/False	0/1	This configuration determines whether the numbers displayed on the x-axis of the chart will be formatted using commas, e.g., 40,000 if ‘formatNumber’: ‘1’; and 40000 if ‘formatNumber’: ‘0’;. If this attribute is not specifically mentioned, the chart inherits the default value from `formatNumber` attribute.
formatNumberScale	True/False	0/1	Configuration whether to add K (thousands) and M (millions) to a number after truncating and rounding it – e.g., if `formatNumberScale` is set to 1, 1043 will become 1.04K (with decimals set to 2 places). Same with numbers in millions – an M will be added at the end. The value of this attribute works only if `yFormatNumberScale` and `xFormatNumberScale` attributes are not specifically mentioned.
yFormatNumberScale	True/False	0/1	Configuration whether to add K (thousands) and M (millions) to a number after truncating and rounding it on the y-axis – e.g., if `yFormatNumberScale` is set to 1, 1043 will become 1.04K (with decimals set to 2 places). Same with numbers in millions – an M will be added at the end. If this attribute is not specifically mentioned, the chart inherits the default value from `formatNumberScale` attribute.
xFormatNumberScale	True/False	0/1	Configuration whether to add K (thousands) and M (millions) to a number after truncating and rounding it on the x-axis – e.g., if `xFormatNumberScale` is set to 1, 1043 will become 1.04K (with decimals set to 2 places). Same with numbers in millions – an M will be added at the end. If this attribute is not specifically mentioned, the chart inherits the default value from `formatNumberScale` attribute.
defaultNumberScale	Text	Any	The default unit of the numbers that you’re providing to the chart. The value of this attribute works only if `yDefaultNumberScale` and `xDefaultNumberScale` attributes are not specifically mentioned.
yDefaultNumberScale	Text	Any	The default unit of the numbers of the y-axis that you’re providing to the chart. If this attribute is not specifically mentioned, the chart inherits the default value from `defaultNumberScale` attribute.
xDefaultNumberScale	Text	Any	The default unit of the numbers of the x-axis that you’re providing to the chart. If this attribute is not specifically mentioned, the chart inherits the default value from `defaultNumberScale` attribute.
numberScaleUnit	Text	Any	Unit of each block of the scale. The value of this attribute works only if `yNumberScaleUnit` and `xNumberScaleUnit` attributes are not specifically mentioned.
yNumberScaleUnit	Text	Any	Unit of each block of the scale of the y-axis. If this attribute is not specifically mentioned, the chart inherits the default value from `numberScaleUnit` attribute.
xNumberScaleUnit	Text	Any	Unit of each block of the scale of the x-axis. If this attribute is not specifically mentioned, the chart inherits the default value from `numberScaleUnit` attribute.
numberScaleValue	Text	Any	Range of the various blocks that constitute the scale. The value of this attribute works only if `yNumberScaleValue` and `xNumberScaleValue` attributes are not specifically mentioned.
forceNumberScale	True/False	0/1	If a data value is less than the lowest given number is the number scale, this attribute forces the lower value of the `numberScaleUnit` to be applied to that data value. This attribute works only when `“formatNumberScale”: “1”` and the `defaultNumberScale` attribute is not defined. For example, if `“numberScaleUnit”: “K, M”`, `“numberScaleValue”: “1000, 1000”`, and `“forceNumberScale”: “1”`, a data value of `400` will be rendered as `0.40K`.
scaleRecursively	True/False	0/1	Whether recursive scaling should be applied.
xScaleRecursively	True/False	0/1	Whether to scale the number recursively for the x-axis? This attribute will work only if the attribute `xAxisLabelMode` is set to ‘`AUTO`’ or ‘`MIXED`’.
maxScaleRecursion	Number	Any	How many recursions to complete during recursive scaling? -1 completes the entire set of recursion.
xMaxScaleRecursion	Number	Any	How many recursions to complete during recursive scaling for the numbers on the x-axis? -1 completes the entire set of recursion.
scaleSeparator	Text	Any	What character to use to separate the scales that are generated after recursion?
xScaleSeparator	Text	Any	This attribute is used to specify the character that will be used to separate the scales that are generated after recursion for the numbers on the x-axis.
yNumberScaleValue	Text	Any	Range of the various blocks that constitute the y-axis scale. If this attribute is not specifically mentioned, the chart inherits the default value from `numberScaleValue` attribute.
xNumberScaleValue	Text	Any	Range of the various blocks that constitute the x-axis scale. If this attribute is not specifically mentioned, the chart inherits the default value from `numberScaleValue` attribute.
numberPrefix	Text	Character	Using this attribute, you could add prefix to all the numbers visible on the graph. For example, to represent all dollars figure on the chart, you could specify this attribute to $ to show like $40000, $50000. The value of this attribute works only if `yNumberPrefix` and `xNumberPrefix` attributes are not specifically mentioned.
yNumberPrefix	Text	Character	Using this attribute, you could add prefix to all the numbers visible on the y-axis. For example, to represent all dollars figure on the y-axis, you could specify this attribute to $ to show like $40000, $50000. If this attribute is not specifically mentioned, the chart inherits the default value from `numberPrefix` attribute.
xNumberPrefix	Text	Character	Using this attribute, you could add prefix to all the numbers visible on the x-axis. For example, to represent all dollars figure on the x-axis, you could specify this attribute to $ to show like $40000, $50000. If this attribute is not specifically mentioned, the chart inherits the default value from `numberPrefix` attribute.
numberSuffix	Text	Character	Using this attribute, you could add a suffix to all the numbers visible on the graph. For example, to represent all figures quantified as per annum on the chart, you could specify this attribute to ‘/a’ to show like 40000/a, 50000/a. The value of this attribute works only if `yNumberSuffix` and `xNumberSuffix` attributes are not specifically mentioned.
yNumberSuffix	Text	Character	Using this attribute, you could add a suffix to all the numbers visible on the y-axis. For example, to represent all figure quantified as per annum on the y-axis, you could specify this attribute to ‘/a’ to show like 40000/a, 50000/a. If this attribute is not specifically mentioned, the chart inherits the default value from `numberSuffix` attribute.
xNumberSuffix	Text	Character	Using this attribute, you could add a suffix to all the numbers visible on the x-axis. For example, to represent all figure quantified as per annum on the x-axis, you could specify this attribute to ‘/a’ to show like 40000/a, 50000/a.If this attribute is not specifically mentioned, the chart inherits the default value from `numberSuffix` attribute.
decimalSeparator	Text	Character	This attribute helps you specify the character to be used as the decimal separator in a number.
thousandSeparator	Text	Character	This attribute helps you specify the character to be used as the thousands separator in a number.
thousandSeparatorPosition	Number		This option helps you specify the position of the thousand separator.
inDecimalSeparator	Text	Character	In some countries, commas are used as decimal separators and dots as thousand separators. In XML, if you specify such values, it will give an error while converting to number. So, Exago accepts the input decimal and thousand separator from user, so that it can convert it accordingly into the required format. This attribute lets you input the decimal separator.
inThousandSeparator	Text	Character	In some countries, commas are used as decimal separators and dots as thousand separators. In XML, if you specify such values, it will give an error while converting to number. So, Exago accepts the input decimal and thousand separator from user, so that it can convert it accordingly into the required format. This attribute lets you input the thousand separator.
decimals	Number	0-10	Number of decimal places to which all numbers on the chart will be rounded to.
forceDecimals	True/False	0/1	Whether to add 0 padding at the end of decimal numbers. For example, If you limit the maximum number of decimal digits to 2, a number like 55.345 will be rounded to 55.34. This does not mean that all numbers will be displayed with a fixed number of decimal places. For instance 55 will not be displayed as 55.00 and 55.1 will not become 55.10. In order to have fixed number of decimal places attached to all the numbers, set this attribute to 1.

Font Properties

Using the attributes below, you can define the generic font properties for all the text on the chart. These attributes allow you a high level control over font properties. If you intend to specify font properties for individual chart elements (like Caption, sub-caption etc.), you’ll need to use the Styles feature of Exago. Using Styles, you can also specify advanced font properties like Bold, Italics, HTML Mode etc.

Attribute	Type	Value	Description
baseFont	Text	Font Name	This attribute lets you set the font face (family) of all the text (data labels, values etc.) on chart. If you specify the `outCnvBaseFont` attribute also, then this attribute controls only the font face of text within the chart canvas bounds.
baseFontSize	Number	6 – 72	This attribute sets the base font size of the chart i.e., all the values and the names in the chart which lie on the canvas will be displayed using the font size provided here.
baseFontColor	Color	Hex Color Code	This attribute sets the base font color of the chart i.e., all the values and the names in the chart which lie on the canvas will be displayed using the font color provided here.
outCnvBaseFont	Text	Font Name	This attribute sets the base font family of the chart text which lies outside the canvas i.e., all the values and the names in the chart which lie outside the canvas will be displayed using the font name provided here.
outCnvBaseFontSize	Number	6 – 72	This attribute sets the base font size of the chart i.e., all the values and the names in the chart which lie outside the canvas will be displayed using the font size provided here.
outCnvBaseFontColor	Color	Hex Color Code	This attribute sets the base font color of the chart i.e., all the values and the names in the chart which lie outside the canvas will be displayed using the font color provided here.

Tooltip Attributes

These attributes let you control the tool tip. You can set the background color, border color, separator character and few other details.

Attribute	Type	Value	Description
showToolTip	True/False	0/1	Whether to show tool tip on chart.
toolTipBgColor	Color	Hex Color Code	Background color for tool tip.
toolTipColor	Color	Hex Color Code	Font color for the tool-tip.
toolTipBorderColor	Color	Hex Color Code	Border color for tool tip.
tooltipBorderAlpha	Number	0 – 100	Sets the border transparency for tool tip.
toolTipSepChar	Text	Any	The character specified as the value of this attribute separates the name and value displayed in tool tip.
seriesNameInToolTip	True/False	0/1	For bubble charts, Exago shows the following information in tool tip (unless tool text is explicitly defined): “Series Name, Category Name, Data Value”. This attribute lets you control whether series name will show up in tool tip or not.
showToolTipShadow	True/False	0/1	Whether to show shadow for tool-tips on the chart.
plottooltext	Text	Any	Specify custom text for the tooltip You can either specify a constant string as the tooltip text or you can use variable values from the data level by prefixing a `$` to the attribute name, for example, `$name`, `$value`.

Toolbar Attributes

Using this set of attributes, you can customize the toolbar on the chart. The advantage of having a toolbar is that it manages all the UI action elements (context menus, checkboxes, buttons) centrally. This provides a clean, uniform look and a better, more meaningful and logical grouping.

Attribute	Type	Value	Description
toolbarPosition	Text	TL, TR, BL, BR, CC	Where to position the toolbar on the chart: TL – Top-left TR – Top-right BR – Bottom right BL – Bottom left CC – Center of screen
toolbarX	Number	Any	Sets the toolbox position on the chart with respect to x-axis.
toolbarY	Number	Any	Sets the toolbox position on the chart with respect to y-axis.
toolbarHAlign	Text	Left, Right	Sets the horizontal alignment of the toolbar on the chart.
toolbarVAlign	Text	Top, Bottom	Sets the vertical alignment of the toolbar on the chart
toolbarButtonColor	Color	Any (color code without the # prefix)	Sets the color of the toolbar buttons.
showToolBarButtonTooltext	True/False	0/1	Enables/disables display of tooltips for toolbar buttons.
toolbarButtonScale	Number	Any	You can change the scale of the toolbar by specifying a value for this attribute.

Attributes for Exporting Charts

These attributes allow you to control the saving of chart as image, SVG or XLSX.

Attribute	Type	Value	Description
exportEnabled	True/False	0/1	Whether the chart will allow exporting to images, PDFs, SVG, XLSX or CSV format. Default value: 0
exportAction	Text	‘save’ or ‘download’	In case of server-side exporting, the action specifies whether the exported image will be sent back to client as download, or whether it’ll be saved on the server. Default value: download
exportHandler	Text	Any	In case of server side exporting, this refers to the path of the server-side export handler (the ready-to-use scripts that we provide).
exportFormats	Text	Any	Lets you configure what output formats to allow for export of chart, in the export context menu, and also customize the label for each menu item. The attribute value should be a pipe (|) delimited separated key-value pair. Example: `exportFormats: ‘PNG=Export as High Quality Image|JPG|PDF=Export as PDF File’`
exportMode	Text	Any	This attributes sets the modes of export. To enable client-side exporting, set this attribute to `client`. Default value: auto. Note: Starting v3.12.1, the `exportMode` attribute replaces the `exportAtClientSide` attribute. However, you don’t need to make any changes to the existing setup because, the Exago library comes with the proper mapping already provided.
exportShowMenuItem	True/False	0/1	Whether the menu items related to export (e.g., Save as JPEG etc.) will appear in the context menu of chart.
exportTargetWindow	Text	‘_self’ or ‘_blank’	In case of server-side exporting and when using download as action, this lefts you configure whether the return image, PDF, SVG or XLSX will open in same window (as an attachment for download), or whether it will open in a new window. Default value: _self
exportFileName	Text	Any	Using this attribute you can specify the name (excluding the extension) of the output (export) file.

Data Plot Hover Effects

If you wish to show an effect on the data plot (column, line anchor, pie etc.) when the user hovers his mouse over the data plot, these attributes let you configure the cosmetics of the hover for all data plots in the chart.

Attribute	Type	Value	Description
showHoverEffect	True/False	0/1	Whether to enable hover effect on charts for all elements
plotHoverEffect	True/False	0/1	Whether to enable hover effect on charts for data plots (e.g., column, pie) only
plotFillHoverColor	Color	Hex Color Code	Specifies the hover color for the data plots
plotFillHoverAlpha	Number	1 – 100	Specifies the hover alpha for data plots
bubbleHoverColor	Color	Hex Color Code	This attribute specifies the hover color for the bubbles.
bubbleHoverAlpha	Number	0 – 100	This attribute specifies the transparency of the bubble when hovered.
plotBorderHoverColor	Color	Hex Color Code	Sets the color of the border of plot when hovered.
plotBorderHoverThickness	Number	In Pixels	Sets the thickness of the border of plot when hovered.
bubbleHoverScale	Number	In pixels	This attribute sets the scale of bubble when hovered.
is3dOnHover	True/False	0/1	Whether to show 3D bubble on hover. If not specified, the effect is guided by is3D attribute.

Chart Padding & Margins

The following attributes help you control chart margins and paddings. Exago allows you to manually customize the padding of various elements on the chart to allow advanced manipulation and control over chart visualization. You can also define the chart margins. Chart Margins refer to the empty space left on the top, bottom, left and right of the chart. That means, Exago will not plot anything in that space. It’s not necessary for you to specify any padding/margin values. Exago automatically assumes the best values for the same, if you do not specify the same.

Attribute	Type	Value	Description
captionPadding	Number	In Pixels	This attribute lets you control the space (in pixels) between the sub-caption and top of the chart canvas. If the sub-caption is not defined, it controls the space between caption and top of chart canvas. If neither caption, nor sub-caption is defined, this padding does not come into play.
xAxisNamePadding	Number	In Pixels	Using this, you can set the distance between the top end of x-axis title and the bottom end of data labels (or canvas, if data labels are not to be shown).
yAxisNamePadding	Number	In Pixels	Using this, you can set the distance between the right end of y-axis title and the start of y-axis values (or canvas, if the y-axis values are not to be shown).
yAxisValuesPadding	Number	In Pixels	This attribute helps you set the horizontal space between the canvas left edge and the y-axis values or trend line values (on left/right side). This is particularly useful, when you want more space between your canvas and y-axis values.
labelPadding	Number	In Pixels	This attribute sets the vertical space between the labels and canvas bottom edge. If you want more space between the canvas and the x-axis labels, you can use this attribute to control it.
chartLeftMargin	Number	In Pixels	Amount of empty space that you want to put on the left side of your chart. Nothing is rendered in this space.
chartRightMargin	Number	In Pixels	Amount of empty space that you want to put on the right side of your chart. Nothing is rendered in this space.
chartTopMargin	Number	In Pixels	Amount of empty space that you want to put on the top of your chart. Nothing is rendered in this space.
chartBottomMargin	Number	In Pixels	Amount of empty space that you want to put at the bottom of your chart. Nothing is rendered in this space.
legendPadding	Number	In Pixels	Padding of legend from right/bottom side of canvas
canvasPadding	Number	In Pixels	Lets you set the space between the canvas border and first & last data points
canvasLeftPadding	Number	In Pixels	This attribute lets you set the space between the left of the canvas border and the canvas of the chart. This attribute is particularly useful when your data plot gets clipped by the left border of the canvas. Using this attribute, you can control the amount of empty space between the chart left side and data plot which might get clipped.
canvasRightPadding	Number	In Pixels	This attribute lets you set the space between the right of the canvas border and the canvas of the chart. This attribute is particularly useful when your data plot gets clipped by the right border of the canvas. Using this attribute, you can control the amount of empty space between the chart right side and data plot which might get clipped.
canvasTopPadding	Number	In Pixels	This attribute lets you set the space between the top of the canvas border and the canvas of the chart. This attribute is particularly useful when your data plot gets clipped by the top border of the canvas. Using this attribute, you can control the amount of empty space between the chart’s top and data plot which might get clipped.
canvasBottomPadding	Number	In Pixels	This attribute lets you set the space between the bottom of the canvas border and the canvas of the chart. This attribute is particularly useful when your data plot gets clipped by the bottom border of the canvas. Using this attribute, you can control the amount of empty space between the chart’s bottom and data plot which might get clipped.
canvasLeftMargin	Number	In Pixels	This attribute lets you control the space between the start of chart canvas and the start (x) of chart. In case of 2D charts, the canvas is the visible rectangular box. In case of 3D charts, the canvas box is the imaginary box around the 3D canvas. Using this attribute, you can control the amount of empty space between the chart left side and canvas left side. By default, Exago automatically calculates this space depending on the elements to be placed on the chart. However, if you want to over-ride this value with a higher value, you can use this attribute to specify the same. Please note that you cannot specify a margin lower than what has been calculated by the chart. This attribute is particularly useful, when you’ve multiple charts placed in a page and want all their canvas start position to align with each other – so in such a case, you can set same margin value (a value large enough that it doesn’t get rejected by chart owing to it being lower than the calculated value) for all such charts in the page.
canvasRightMargin	Number	In Pixels	Like `canvasLeftMargin`, this attribute lets you set the space between end of canvas and end of chart.
canvasTopMargin	Number	In Pixels	Like `canvasLeftMargin`, this attribute lets you set the space between top of canvas and top of chart.
canvasBottomMargin	Number	In Pixels	Like `canvasLeftMargin`, this attribute lets you set the space between bottom of canvas and bottom of chart.

The categories Object

The `categories` object and the `category` object (child of the `categories` object) are used to specify x-axis labels for multi-series charts. The attributes of the `categories` object are used to set the font properties of all x-axis labels collectively.

Attribute	Type	Value	Description
font	Text	Valid font face	Lets you specify font face for the x-axis data labels.
fontColor	Color	Hex Color Code	Lets you specify font color for the x-axis data labels.
fontSize	Number	Any	Lets you specify font size for the x-axis data labels.
verticalLineAlpha	Number	0 – 100	Lets you set the alpha for category lines.
verticalLineColor	Color	Hex Color Code	In the bubble/scatter chart, you can opt to show vertical lines for each category label. This attribute lets you set the color for all of them.
verticalLineDashed	True/False	0/1	Whether the vertical lines should be rendered as dashed lines. Default value: 0 (trendline rendered using straight lines)
verticalLineDashLen	Number	In Pixels	Sets the length of each dash when vertical lines are rendered as dashed lines.
verticalLineDashGap	Number	In Pixels	Sets the gap between consecutive dashes when vertical lines are rendered as dashed lines.
verticalLineThickness	Number	In Pixels	Lets you set the thickness for category lines.

The category Object

The attributes of the `category` object are used to define and customize individual x-axis labels for multi-series charts.

Attribute	Type	Value	Description
label	Text	Any	This attribute determines the label for the data item. The label appears on the x-axis of chart. Note: The `label` attribute replaces the `name` attribute. Previously, either one of the attributes could be used to set the label. Support for the `name` attribute has been discontinued since v3.10.0.
lineDashed	True/False	0/1	Whether the vertical lines should be rendered as dashed lines. Default value: 0 (vertical lines using straight lines)
showLabel	True/False	0/1	You can individually opt to show/hide labels of individual data items using this attribute.
showVerticalLine	True/False	0/1	Whether the vertical line should be shown for this category.
x	Number	Numeric Value	The bubble/scatter chart have both x and y axis as numeric. This attribute lets you define the x value (numerical position on the x-axis) where this category name will be placed.
font	Text	Any	Sets the x-axis label font family for the text.
fontColor	Color	Hex Color Code	Sets the x-axis label font color.
fontSize	Number	6 – 72	Specifies the x-axis label font size.
fontBold	True/False	0/1	Flag indicating whether x-axis label font should be bold or not.
fontItalic	True/False	0/1	Flag indicating whether x-axis label font should be italicized or not.
bgColor	Color	Hex Color Code	Sets the background color for x-axis label text.
borderColor	Color	Hex Color Code	Sets the color of the border around the x-axis label text.
alpha	Number	0 – 100	Sets the x-axis label alpha for both font and background.
bgAlpha	Number	0 – 100	Sets the x-axis label background alpha.
borderAlpha	Number	0 – 100	Sets the x-axis label border alpha.
borderPadding	Number	In Pixels	Sets the x-axis label border padding.
borderRadius	Number	In Pixels	Sets the x-axis label border radius.
borderThickness	Number	In Pixels	Sets the x-axis label border thickness.
borderDashed	True/False	0/1	Whether the border around x-axis label should be rendered using dashed lines. Default value: 0 (border rendered using straight lines)
borderDashLen	Number	In pixels	Sets the length of each dash when the border around the x-axis label is rendered using dashed lines.
borderDashGap	Number	In pixels	Sets the gap between two consecutive dashes when the border around x-axis label is rendered using dashed lines.

The dataset object

Each `dataset` object contains a series of data. For example, for a monthly sales comparison chart for two successive years, the first data-set would contain the data for first year and the next one for the second year. You can provide data-set level cosmetics so that all data within that data-set will be plotted in the same color/alpha/etc. Depending on the chart type, there are a number of attributes that you can define for each `dataset` object.

Attribute	Type	Value	Description
seriesName	Text	Any	Lets you specify the series name for a particular dataset. For example, if you’re plotting a chart to indicate monthly sales analysis for 2005 and 2006, the `seriesName` for the first dataset will be 2005 and that of the second will be 2006. The `seriesName` of a dataset is shown in legend.
color	Color	Hex Color Code	This attribute sets the color using which columns, lines, area of that dataset will be drawn. For column chart, you can specify a list of comma separated Hex Color Codes to get a gradient plot
plotFillAlpha	Text	0 – 100 or Comma Separated List	This attribute sets the alpha (transparency) of the entire dataset.
showValues	True/False	0/1	Whether to show the values for this dataset.
valueFontColor	Color	Hex Color Code	Specifies the font color of data values for a particular dataset.
valueBgColor	Color	Hex Color Code	Sets the background color of value text for a particular dataset.
valueBorderColor	Color	Hex Color Code	Sets the border color around the value text for a particular dataset.
includeInLegend	True/False	0/1	Whether to include the seriesName of this dataset in legend.
showPlotBorder	True/False	0/1	Whether to show the border of this dataset.
plotBorderColor	Color	Hex Color Code	Color for data plot border of this dataset
plotBorderThickness	Number	0-5	Thickness for data plot border of this dataset
plotBorderAlpha	Number	0 – 100	Alpha for data plot border of this dataset
showRegressionLine	True/False	0/1	This attribute, when set to ‘1`, draws a regression line for the dataset, for which the attribute is defined.
showYOnX	True/False	0/1	When it is set to ‘1’ the regression line is drawn using Y On X mode and when the attribute is set to ‘0’ the regression line is drawn using X On Y mode. By default, this attribute is set to ‘1’.
regressionLineColor	Color	Hex Color Code	This attribute allows you to set the color of the regression line.
regressionLineThickness	Number		This attribute allows you to set the thickness of the regression line.
regressionLineAlpha	Number	0 – 100	This attribute allows you to set the transparency of the regression line.
showHoverEffect	True/False	0/1	Whether to enable hover effect for the dataset.
hoverColor	Color	Hex Color Code	This attribute can set the hover color for the dataset.
hoverAlpha	Number	0 – 100	This attribute sets the transparency for the dataset when hovered.
is3dOnHover	True/False	0/1	This attribute sets whether to render the bubbles in 3D mode on hover.
hoverScale	Number	In pixels	This attribute scales the bubbles on hover.

The data Object

Each instance of the `data` object (child of the `dataset` object) represents a set of data which is to be plotted on the chart and determines a set of data which would appear on the chart. For a bubble chart, one instance of the `data` object looks like this:

"dataset"[{
	"data": [{
		"x": "80",
		"y": "15000",
		"z": "24",
		"name": "Nike"
		}]
	}]

Attribute	Type	Value	Description
x	Number	Numeric Value	X-axis value for the set. The bubble/scatter point will be placed horizontally on the x-axis based on this value.
y	Number	Numeric Value	Y-axis value for the set. The bubble/scatter point will be placed vertically on the y-axis based on this value.
z	Number	Numeric Value	Z-axis numerical value for the set of data. The size of bubble will depend on this value (with respect to z values of other bubbles on the chart).
displayValue	Text		If instead of the numerical value of this data, you wish to display a custom string value, you can specify the same here. Examples are annotation for a data item etc.
color	Color	Hex Color Code	For multi-series and combination charts, you can define the color of datasets at dataset level. However, if you wish to highlight a particular data element, you can specify its color at “set” level using this attribute.
link	Text	Any	You can define links for individual data items. That enables the end user to click on data items (columns, lines, bars etc.) and drill down to other pages. To define the link for data items, use the link attribute. You can define links that open in same window, new window, pop-up window or frames. Please see “Drill-Down > Using JavaScript Functions as Links” for more information. Also, you’ll need to Url Encode all the special characters (like ? and &) present in the link.
toolText	Text	Any	By default, Exago shows the series name, category name, and value as tool tip text for that data item. But, if you want to display more information for the data item as tool tip, you can use this attribute to specify the same.
showValue	True/False	0/1	You can individually opt to show/hide values of individual data items using this attribute. This value over-rides the dataset level value.
valueFontColor	Color	Hex Color Code	Specifies the font color of a data value for an individual data plot.
valueBgColor	Color	Hex Color Code	Sets the background color of a value text for an individual data plot.
valueBorderColor	Color	Hex Color Code	Sets the border color around the value text for an individual data plot.
alpha	Number	0 – 100	For multi-series and combination charts, you can define the alpha of datasets at dataset level. However, if you wish to highlight a particular data element, you can specify its alpha at “set” level using this attribute.
showHoverEffect	True/False	0/1	Whether to enable hover effect for a particular data plot.
hoverColor	Color	Hex Color Code	This attribute can set the hover color for a particular data plot.
hoverAlpha	Number	0 – 100	This attribute sets the transparency for a particular data plot when hovered.
is3dOnHover	True/False	0/1	This attribute sets whether to render a particular bubble in 3D mode on hover.
hoverScale	Number	In pixels	This attribute scales the bubble on hover.

Trend-lines

Trend-lines are horizontal lines that aid in interpretation of data with respect to some pre-determined value. For example, if you are plotting the sales data for the current year, you might want to show the previous year’s average monthly sales as a trend indicator for ease of comparison. The `lines` object, child of the `trendlines` object is used to add trend-lines to a chart. Although the `line` object has to be defined within the `trendlines` object, the latter cannot be used to collectively customize trend-lines, because it does not have any attributes of its own. The attributes of the `lines` object, child of the `trendlines` object, are used to create and customize trend-lines for charts.

Attribute	Type	Value	Description
startValue	Number	Numeric Value	The starting value for the trendline. Say, if you want to plot a slanted trendline from value 102 to 109, the `startValue` will be 102.
endValue	Number	Numeric Value	The ending y-axis value for the trendline. Say, if you want to plot a slanted trendline from value 102 to 109, the `endValue` will be 109. If you do not specify a value for `endValue`, it will automatically assume the same value as `startValue`.
displayValue	Text	Any	If you want to display a string caption for the trend line by its side, you can use this attribute. Example: `displayValue=’Last Month High’`. When you don’t supply this attribute, it automatically takes the value of `startValue`.
color	Text	Hex Color Code	Color of the trend line and its associated text
isTrendZone	True/False	0/1	Whether the trend will be displayed as a line or a zone (fill-colored rectangle).
showOnTop	True/False	0/1	Whether the trend line/zone will be displayed over data plots or under them.
thickness	Number	In Pixels	If you’ve opted to show the trend as a line, this attribute lets you define the thickness of trend line.
alpha	Number	0 – 100	Alpha of the trend line.
dashed	True/False	0/1	Whether the trendline should be rendered as dashed lines. Default value: 0 (trendline rendered using straight lines)
dashLen	Number	In pixels	Sets the width of each dash when trendline is rendered as dashed lines.
dashGap	Number	In pixels	Sets the gap between consecutive dashes when trendline is rendered as dashed lines.
valueOnRight	True/False	0/1	Whether to show the trend line value on left side or right side of chart. This is particularly useful when the trend line display values on the chart are colliding with divisional lines values on the chart.
showtrendlinelabels	True/False	0/1	It sets the configuration whether the trend line labels will be displayed or not.

Trend-lines (Chart level attributes)

Trend-lines are horizontal lines that aid in interpretation of data with respect to some pre-determined value. For example, if you are plotting the sales data for the current year, you might want to show the previous year’s average monthly sales as a trend indicator for ease of comparison. Cosmetics for all the trend-lines rendered can be attained using this set of attributes. Although there are set of attributes of the `line object`, used to create and customize trend-lines, these set of attributes effect all the trend-lines rendered in your chart.

Attribute	Type	Value	Description
trendlineColor	Color	Hex Color Code	Sets color of all the trend lines and its associated text in the chart.
trendlineThickness	Number	In Pixels	If you’ve opted to show the trend as a line, this attribute lets you define the thickness of all the trend lines in your chart.
trendlineAlpha	Number	0 – 100	Sets transparency for all the trend lines in your charts.
trendLineToolText	Text	Any	Sets the tooltip text of the trend-line. It accepts macros, plain text, and HTML tags, as string.
showTrendlinesOnTop	True/False	0/1	Whether all the trend line/zone will be displayed over data plots or under them.

Trend-lines Display Value Cosmetics

These attributes let you customize the text displayed with a trend-line.
Note: These attributes belong to the `chart` object and not to the `line` object (child of the `trendline` object). They are, therefore, applied to all trend-lines on your chart.

Attribute	Type	Value	Description
trendValueFont	Text	Font Name	Sets the font family for the trend-line display value.
trendValueFontSize	Number		Sets the font size for the trend-line display value.
trendValueFontBold	True/False	0/1	Sets whether the trend-line display value will be bold formatted. Default value: 0 (not bold formatted)
trendValueFontItalic	True/False	0/1	Sets whether the trend-line display value will be italicized. Default value: 0 (not italicized)
trendValueBgColor	Color	Hex Color Code	Sets the background color for the trend-line display value.
trendValueBorderColor	Color	Hex Color Code	Sets the border color for the trend-line display value.
trendValueAlpha	Number	0 – 100	Sets the transparency for the trend-line display value. Default value: 100
trendValueBgAlpha	Number	0 – 100	Sets the transparency for the background of the trend-line display value. Default value: 100
trendValueBorderAlpha	Number	0 – 100	Sets the transparency for the border around the trend-line display value. Default value: 100
trendValueBorderPadding	Number	In pixels	Sets padding for the border around the trend-line display value.
trendValueBorderRadius	Number	In pixels	Sets the radius for the border around the trend-line display value.
trendValueBorderThickness	Number	In pixels	Sets the thickness for the border around the trend-line display value.
trendValueBorderDashed	True/False	0/1	Whether the border around the trend-line display value should be rendered as dashed lines. Default value: 0 (border rendered using straight lines)
trendValueBorderDashLen	Number	In pixels	Sets the length of each dash when the border around the trend-line display value is rendered as dashed lines.
trendValueBorderDashGap	Number	In pixels	Sets the gap between two consecutive dashes when the border around the trend-line display value is rendered as dashed lines.

Vertical Trend-lines

Vertical trend lines help you create vertical trend-lines/zones on scatter (XY Plot) or Bubble charts. These are vertical lines spanning the chart canvas which aid in interpretation of data with respect to some pre-determined value. To add a vertical trend-line to a chart, the `vTrendlines` and `line` (child of the `vTrendlines` object) objects are used as shown below:

"vTRendlines"[{
	"line": [{
		"startValue": "20000",
		"endValue": "3000",
		"isTrendZone": "1",
		"color": "#aaaaaa", 
		"alpha": "14"
		}]
	}]

You can control the cosmetic and functional properties of vertical trend-lines using the following attributes:

Attribute	Type	Value	Description
startValue	Number	Numeric Value	The starting value for the trendline. Say, if you want to plot a slanted trendline from value 102 to 109, the `startValue` will be 102.
endValue	Number	Numeric Value	The ending y-axis value for the trendline. Say, if you want to plot a slanted trendline from value 102 to 109, the endValue will be 109. If you do not specify a value for `endValue`, it will automatically assume the same value as `startValue`.
displayValue	Text	Any	If you want to display a string caption for the trend line by its side, you can use this attribute. Example: `displayValue=’Last Month High’`. When you don’t supply this attribute, it automatically takes the value of `startValue`.
color	Text	Hex Color Code	Color of the trend line and its associated text
isTrendZone	True/False	0/1	Whether the trend will be displayed as a line or a zone (fill-colored rectangle).
thickness	Number	In Pixels	If you’ve opted to show the trend as a line, this attribute lets you define the thickness of trend line.
alpha	Number	0 – 100	Alpha of the trend line.
dashed	True/False	0/1	Whether the trendline should be rendered as dashed lines. Default value: 0 (trendline rendered using straight lines)
dashLen	Number	In pixels	Sets the width of each dash when trendline is rendered as dashed lines.
dashGap	Number	In pixels	Sets the gap between consecutive dashes when trendline is rendered as dashed lines.
toolText	Text		Custom tool-text for this trendline/zone.